answersLogoWhite

0

There are 3 bolts (#10 metric) that must be removed, 2 on top of the assembly and 1 on the bottom-inside. They are easy to see. After these bolts are removed the headlight assembly must be pried off the last connector which is located on the fender side. It will take some force and I recommend using a small pry bar. Once the assembly is removed there is a cover that has to be opened on the back. Once this is open the headlight bulbs are visible as well as the turn signal bulb. Then simply twist out the bulb then the wiring connector has to be removed. Be sure and bend the plastic catch away then pull the connector off.

The top bulb is the low beam, bottom bulb the high beam.

User Avatar

Wiki User

16y ago

What else can I help you with?