1998 Oldsmobile Aurora turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
HOW DO YOU GET THE LEFT TURN SIGNAL BULB OUT ON A 2000 PONTAIC FIREBIRD
need to replace blinker bulb
replace bulb in front
Check or replace the socket
howtochange the dashboard blubs
To replace the left turn signal bulb on a 2003 Ford Escape, first, open the hood and locate the fuse box to ensure the turn signal is not malfunctioning due to a blown fuse. Next, remove the headlight assembly by unscrewing the retaining screws and disconnecting the wiring harness. Once removed, twist the bulb socket counterclockwise to release it, and replace the old bulb with a new one. Finally, reassemble the headlight assembly and test the turn signal to ensure it works properly.
flasher will not flash when circuit is open or shorted replace left front turn signal bulb
you have to take the brake light out of the housing and then twist the amber bulb out
look in your owner's manual
The turn signal and brake light use the same bulb. When you get a fast flash, it is from a reduced electrical load being placed on the flasher unit due to a burned bulb. Replace the bulb and this should fix your problem.
To replace the left turn signal lamp on a 1998 Acura 3.0 CL, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then gently pull it out to access the bulb socket. Turn the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb socket, secure the headlight assembly back in place, and test the turn signal to ensure it works.
If its the front turn signal you open your hood and partly remove the black plastic cover on top of your headlights. Then you should see a screw on that screws on your signal light. Remove the screw and take off the the signal light and then remove the bulb.