0
Take out the battery, unbolt and remove the battery tray. This will expose where the ground is. Unbolt that. Replace in reverse order of the above steps.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What do you do before you replace a fuel pump Chevy 2000 S10 blazer?
Disconnect the negative battery cable from the battery.
How do you replace the starter in a Chevy Astro van?
Before anything you have to remove negative battery cable to avoid to get a shok from that. You will have to release the bolts to replace the starter.
How do you change the battery in a 1997 Chevy Malibu?
Remove the old battery, disconnect the negative cable first and install the new battery connect the negative cable last.
How long is the negative battery cable?
Depends on the car. An E30 BMW neg battery cable is about 6 inches. The neg battery cable on a Chevy small block about 2 feet.
How do you change the negative battery terminal on a 1993 Toyota Corolla?
Replace the battery cable with an OEM style cable. Do not use a clamp on terminal.
Where does the negative battery cable connect to?
The negative battery lead cable is to be connected to the negative lead terminal on the battery.
How do you replace Chevy Cavalier battery ground cable?
Unhook the cable from the Cavaliers battery. Find the opposite end of the cable and pull it out. Fit the new cable in following the old cables route. Connect the non battery end of the cable, then hook to the battery.
How do I replace the battery in a 2004 Tahoe?
First disconnect the negative battery cable, then disconnect the positive battery cable. Batteries usually are held down by a clamp or bracket. Unbolt or unhook the bracket. and remove the battery. Installation is the reverse. Hook negative cable last. HTH
How do you take a battery out of a Chevy S-10?
Open the hood, disconnect the negative battery cable FIRST, then the positive cable, then remove the battery hold down clamp, then lift the battery out. Install in reverse order.
Where are the battery cables connected to a 1997 Chevy van motor?
The positive cable goes to the starter. The negative cable bolts to the engine block.
How do you replace the negative battery cable in a 1998 Hyundai Elantra?
Disconnect the negative cable from the battery. Now disconnect the other end from its ground point. Take that cable to you local auto parts store and buy a replacement. Reverse the procedure to install it.
How do you reset the check engine light on a Chevy implala?
disconnect the negative battery cable for 30 seconds and reconnect it.
