answersLogoWhite

0

remove the brake caliper and rotor then you will see three star head bolts remove those and the hole spindle will come out[you may have to persuade it with a hammer]then bolt on new one and your done

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you change a rear wheel bearing on a 2000 Pontiac Montana?

You need to replace the rear wheel hub - bearing and speed sensor inclusive


What tools do you need to remove the wheel cylinder on a 1993 Pontiac Bonneville?

what tools do i need to remove the wheel cylinder on a 1993 pontiac bonneville


How do you change the front wheel bearing on 1993 Pontiac Bonneville?

On the hub.. that you need to replace because you cant just get the wheel baring for the bonneville... you got 3 bolts that need to come out you take them out you get the hub out... put the new hub back in put the 3 bolts in there and put your tire back on. Then there ya go you jus changed your wheel baring.


How do you replace Pontiac vibe front wheel bearings?

The front wheel bearings, of a Pontiac vibe, can be replaced by first removing the front wheel. Next, remove the axle end cap. Remove the bearing and reverse the process to install the new bearing.


How do you replace wheel bearing on 2003 Pontiac vibe?

To replace the wheel bearing on a 2003 Pontiac Vibe, you'll need to lift the vehicle and remove the wheel. Next, detach the brake caliper and rotor to access the hub assembly. Remove the hub assembly bolts and use a puller to extract the old bearing. Finally, install the new bearing, reassemble the hub, and ensure everything is tightened to specifications before replacing the wheel.


How do you find out which wheel bearing is bad on a 2001 Pontiac grand am gt?

how do you find out if wheel bearing is bad on a 2001 grand am gt


Wheel bolt pattern 93 Pontiac Bonneville ssei?

The wheel bolt pattern is 5x115


How do you replace the front wheel bearing on a 2003 Pontiac vibe GT?

Take off the steering knuckle and press out the bearing and hub.Have the new bearing pressed in with the hub and re install the knuckle.


The traction off light and abs light goes off randomly in a 1999 Pontiac Grand Am SE how can it be fixed?

this has to do with the sensor in the wheel bearing, unfortunatly the sensor and wheel bearing are one unit. first you have to find out which wheel bearing it is and then replace it, these can be expensive. I've had to replace both of mine within months of each other. take it to get a diagnostic done they can tell you which bearing it is.hope this helps


Do you need to replace the wheel bearing when replacing brake discs on a mark 4 golf gti?

no need to replace wheel bearing unless the wheel bearing is worn out


How do you replace the front wheel hub and wheel bearing on 1999 Pontiac grand am?

I found this page with a decent step-by-step process to help guide me in replacing my LH Front Wheel Bearing Assy on my 99 GrandAM GT. It shows how to replace one on a Grand Prix, but they are extremely similar. http://www.paulstravelpictures.com/GM-Wheel-Bearing-Hub-Assembly-Replacement/index.html


How do you replace the rear wheel bearings on a Ford Courier?

How do I put a wheel bearing on with out a wheel bearing press