you havee to remove the lower bolt on the motor mount to get enough clearance to slide it through take it to someone its faster and easier that way
How do you replace the serpentine belt in 1997 sunfire
To replace the serpentine belt on a 1997 Oldsmobile LSS, first, locate the belt routing diagram, typically found on a sticker near the radiator or under the hood. Use a wrench to relieve tension on the tensioner pulley and remove the old belt. Route the new serpentine belt according to the diagram, ensuring it sits properly on all pulleys. Finally, release the tensioner to secure the belt, and double-check the alignment before starting the engine.
How do you tighten the serpentine belt on an oldsmobile ciera
need diagram of the sepentine belt and how it go on.
I could send a photo - email me at ken.elder@shaw.ca
To replace the idler pulley on a 1997 Oldsmobile Aurora with a Northstar V8 engine, first, disconnect the negative battery cable. Remove the serpentine belt by using a wrench on the tensioner pulley to relieve tension. Then, unbolt the old idler pulley from its mounting bracket and replace it with the new pulley, ensuring it’s securely fastened. Finally, re-install the serpentine belt and reconnect the battery cable.
Remove serpentine belt, remove three bolts ,an 2 wires. The alternator will pull up off the motor to remove. Put new alternator in replace bolts, replace wires, an replace the serpentine belt..
where can i get a diagram for a serpentine tensioner belt for a 1998 Oldsmobile bravada
Remove serpentine belt. Remove pulley. Install new pulley. Install serpentine belt.
Oil for 1997 infiniti needed
belt assembly for a 95 Plymouth voyager
How do you route a serpentine belt on a 1992 Cierra Oldsmobile