answersLogoWhite

0

First you drain the trans by removing the pan, then you remove the trans oil filter, the solenoids are clearly visible after that. All that is left is to remove the retaining bolt that holds the solenoid to the valve body. Install new solenoid in reverse order.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Shift solenoid c in 97 ranger location?

where is shift solenoid


How to replace shift solenoid A in a 1997 Pontiac grandprix SE?

I will probably find out tomorrow--mine seems to need replacement in my 97 GP. 3.8


Where is the shift solenoid 97 intrepid?

It is inside the trans, on top of the valve body.


Where is the shift solenoid 97 civic?

its located at the bottom of the transmission its the longer one


Location of shift solenoid b for 97 Chrysler sebring convertible?

The shift solenoid B for a 1997 Chrysler Convertible is located inside the transmission. The speed sensor has to be removed to access the bolts to remove the cover over this shift solenoid.


Where is the shift 1 solenoid located on a 97 tracer?

They are in the transmission. It is not a job for someone inexperienced at all.


Where is the transmission shift solenoid on a 97 dodge ram?

Inside the trans, on the side of the valve body.


How do you replace the shift cylinoid in a 97 mercury villager?

Shift solenoids are inside the transmission, and require disassembly of the transmission to replace.


How do you replace blend door actuator on 97 ford expedition?

How do i replace blend door motor


Where is the gear shift solenoid located on 97 Pontiac gp?

I'm not sure about a Pontiac, but on my mom's Ford Escort it is located under the all the plastic housing where the gear shift is mounted on the floor. It should be located somewhere near your safety interlock override button, as this is attached to the solenoid itself. You can use the override button to bypass the solenoid if it quits working so that you can get at least get your car in gear until you get a chance to replace solenoid.


How do you change a shift control solenoid valve on a 97 Honda civic?

To change the shift control solenoid valve on a 1997 Honda Civic, first, disconnect the negative battery terminal and safely lift the vehicle. Remove the transmission oil pan to access the solenoid, then disconnect the electrical connector and remove the retaining bolts for the solenoid. Install the new solenoid in reverse order, ensuring to replace the gasket and refill the transmission fluid before reconnecting the battery. Finally, test the operation to ensure everything is functioning correctly.


Error code is P1400 on a 97 Nissan Maxima what part do I replace?

Check your EGRC Solenoid valve.