First you have to remove the whole tail light assembly by removing two screws located in the rear hatch/door piller. You'll see two large holes inside that is the screw that hols the tail light assembly. BE CAREFUL! Use a magnetic screwdriver because the screw can drop between the two pieces of sheet metal. After removeing the two screws, twist the assy twords the out side of the truck to get the tabs to release. once you get the light out the rest is easy.
Bulb is blown. Replace bulb.
expose back of bulb, turn to the left, replace bulb, return to socket, turn to the right
The tail light bulb on a 1999 Chevy Suburban is replaced by removing the retaining screws, pulling the bulb assembly away from the vehicle, and unscrewing the bulb. A new bulb can then be installed and the assembly screwed back in place.
Check the side of the bulb should be labeled or bring to auto parts store they should be able to identify
To replace the service engine light bulb on a 1998 GMC Suburban, first disconnect the negative battery cable to ensure safety. Remove the instrument panel by unscrewing the necessary screws and gently pulling it out. Locate the bulb socket for the service engine light, twist it counterclockwise to remove, and replace the old bulb with a new one. Finally, reassemble the panel, reconnect the battery, and check that the light functions properly.
To change that bulb push the bulb down and turn to take out you may need to unscrew the cover first and replace it with the same bulb
fuesed breaklamp replace bulb.
Very carefully
remve the tail light they are on the back side.
if it is an LED unit you cant you have to change the assembly as a unit
lift the boot, and grab a screw driver and unscrew the light and then at the back of the light twist the bulb out and replace and twist it back in afterwards.
How do it replace the stop light bulb