0
Open up your tailgate and on the sides of the taillights will be screws, you need a Allen wrench or Allen type screwdriver. Unscrew them and pull out the taillight assembly (use a little muscle it'll come out,don't drop it) there you will find the bulb sockets gently twist out and replace the bulb ( the bulb number should be on the base,use this for replacement bulb) reinstall the taillight and put the screws back in.
NOTE: the driver side access to the screws are a little tight and the passenger side is completely visible when you open the tailgate (2 screws per tailight )..
What else can I help you with?
2003 Jeep Liberty parking lights?
replace rear tail light bulb
How do you replace a turn signal bulb on a 2004 Jeep Liberty there is no screws?
how do you replace a turn signal bulb on a 2004 jeep liberty. I can not find screws or a panel to go through
How do you change a stop light bulb in a 2002 Jeep Liberty?
See the amswer for "How do you change the rear stop light bulb on a 2002 Jeep Liberty passenger side". It works.
How do you replace the stopbrake light bulb on a 2002 Jeep Grand Cherokee?
wjjeeps.com . they show how to replace every light and with what bulb
What is the bulb number for brake light on 2004 jeep liberty?
See sources and related links below for the 2004 Jeep Liberty Brake Light Lamp Numbers.
How do you replace dome light for a 2003 Jeep liberty?
To replace the dome light in a 2003 Jeep Liberty, first, use a flathead screwdriver or your fingers to gently pry the light cover off. Once the cover is removed, carefully pull out the old bulb from its socket. Insert the new bulb, ensuring it's securely in place, and then snap the cover back onto the light fixture. Test the light to ensure it's functioning properly.
How do you replace front light bulb on Jeep Liberty 2003?
Go to Schucks, ask for the bulb, buy it and ask the guy to show you how to install it. They do that at Schucks. It's not too tough, but it's good to have someone show you.
What size is a Jeep Liberty's dome light bulb?
GE 211-2 -or- 212-2
How do you change a shift console bulb on a 2002 Jeep Liberty?
Begin by removing the 2002 Jeep Liberty shift console retaining bolts. Lift the shift console up and the light bulb will be visible. Take hold of the light bulb, push in and turn at the same time to remove it. Reverse the process to install your new shift console light bulb.
What size bulb is third brake light on 03 Jeep Liberty?
The third brake light on a 2003 Jeep Liberty uses a 921 bulb. This bulb is commonly used for various automotive applications and can be easily found at auto parts stores. Always double-check with your vehicle’s manual or a trusted source to confirm compatibility before purchasing a replacement bulb.
What is the brake light number On a 2011 Jeep Liberty?
The brake light bulb number for a 2011 Jeep Liberty is typically 3157. This bulb is used for the brake lights and tail lights. Always consult your vehicle's owner manual or a parts retailer for confirmation and to ensure you have the correct part for your specific model.
How do you replace the brake light on a 2001 Jeep Cherokee?
To replace the brake light bulb you need to remove the whole light assembly. Once removed the change is simple.
