That is a very difficult job as it entails removing the entire k frame from underneath the van. Your best bet for do it yourself would be to invest in a repair manual from Haynes or Chilton, as they will have details instructions on how to do this.
inside the transmission pan
transmission bands
According to the 2001 Ford Windstar Owner Guide : ( Motorcraft MERCON-V is used in the automatic transaxle / transmission )
About $2500.00
I am looking around to replace the transmission on my 1995 Ford Windstar and the information that I received from several different mechanics is that the 1995 Windstar transmission is a "one year" transmission so you pretty much have to get a 1995 transmission for a 1995 windstar engine. I'm no mechanic and really have no idea but this is just what I've been told... someone out!
my 2001 ford windstar wont shift out of first gear.
To replace the transmission range sensor on a 2001 Ford Windstar, first, disconnect the battery to ensure safety. Then, locate the sensor on the transmission, typically on the driver's side near the shift linkage. Remove the electrical connector and the mounting bolts to take out the old sensor, then install the new one by reversing the process. Finally, reconnect the battery and test the vehicle to ensure proper function.
I have a 2004 and have had to replace transmission, and replace brakes a lot
The vacuum modulator on aÊ2001 Ford Windstar is located in the front left area under the hood. It is connected to the transmission by wires and tubing.
Yes. The mirror on the 2001 Ford Windstar is the same mirror found on the 1999 Ford Windstar. They are interchangeable.
the transmissions are different 2000 takes ax4s 2001 take ax4n motors would fit some sensors make need to be transfered
Do you have a 3.8 engine for a 2001 Windstar Ford Van?