If it is a B6 motor it will have a plastic cover over the timing belt. E3 or E5 are too easy/simple/straight forward to discuss here. Remove belt,water pump pulley,plastic shroud, bolts on pump, remove pump.
Use a sealant on new pump gasket and refit ,tightening the bolts evenly. Chris
how to replace water pump on 2001 ford focus
how to replace water pump on 2001 ford ranger
Yes they have one!
To replace the water pump on a Ford Laser KC, first, disconnect the negative battery terminal and drain the coolant from the radiator. Remove the drive belt, then take off the timing belt cover to access the water pump. Unbolt the old water pump, clean the mounting surface, and install the new pump with a new gasket. Reassemble the components in reverse order, refill the coolant, and check for leaks.
how do you remove the water pump in a 2002 ford escort
how can ford freestar 2004 water pump be replaced
how to replace water pump in 93 ford econoline 6 cylinder ford van
The water pump on the 2004 Ford Taurus will be replaced by removing the right front wheel to reach the water pump. You will disconnect all hoses to the water pump and replace the pump and put the hoses back on the new pump.
do I have to lower the engine to replace the water pump ona 2000 ford focus zetec engine
yes
very carefully.
The water pump is located in the middle of the front of the engine. The water pump is fairly easy to reach and replace.