answersLogoWhite

0

Remove the two obvious screws from the top and filler neck. There are two more screws in the front of the reservoir that fit into recesses that are molded into the reservoir. That is why the reservoir seems loose but still will not come out. To access these screws, remove the turn signal\parking light assembly by removing 4 Phillips head screws. Use a light to help you see two 1/2" head bolts recessed in between panels of sheet metal. One is right at the top edge of the opening so you may have to shine your light slightly upwards. Use a socket and short extension to back these screws out. You do not have to remove them, just back them out about 1/2". Your reservoir will now slide out easily.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you replace the windshield washer pump on a 2002 Suburban?

I believe you have to remove the battery, battery tray and then the washer fluid reservoir, now you can remove the pump from the reservoir.


How do you get to windshield washer reservoir that is leaking and replace the windshield washer reservoir on a pathfinder?

On ours, it is behind an access panel in front of the RH tire.


How do you replace the windshield washer reservoir on a 2001 Chevrolet Silvarado?

get some1 else to do it


How do you get to windshield washer reservoir that is leaking and replace the windshield washer reservoir on a 2005 Nissan frontier?

you have to remove the plastic cover under the fender, after you should be able to figure it out. it's very simple.


Where in the windshield washer pump on a 2003 dodge caravan and how do you replace it?

The windshield washer pump is attached to the washer fluid reservoir. You will find 2 pumps attached to the reservoir. The other pump feeds the rear window. The reservoir can be unbolted and removed from the engine compartment.


How do you remove the windshield washer fluid reservoir on a 2004 Chevy cavalier?

2004 Chevy Cavalier windshield washer fluid reservoir retaining bolts. Remove the windshield washer fluid supply tube. The windshield washer fluid reservoir will come free.


What side of the windshield washer reservoir does the front windshield washer pump go on a 2002 GMC Yukon?

The pump for the rear window is on the side of the reservoir and the pump for the windshield is on the front of the reservoir


How do you replace a windshield washer pump on a 2001 Chevy Tahoe?

The windshield washer pump is located on the water reservoir. Remove the wheel on the driver's side and then the cowling around the wheel well that is in front of the wheel. Once it is off, the windshield washer pump on the water reservoir will be visible for easy replacement.


How do you replace the windshield washer pump 1997 corolla?

You have to remove the washer fluid reservoir and remove the pump from the bottom area of its side.


What is a windshield washer tank?

reservoir to hold washer fluid


How do you replace the windshield washer pump on a 2003 Honda Element?

To replace the windshield washer pump on a 2003 Honda Element, start by disconnecting the negative battery terminal to ensure safety. Remove the windshield washer reservoir by unfastening any screws or clips securing it and disconnecting the hoses. Once the reservoir is out, locate and unplug the old washer pump from the reservoir, then replace it with the new pump. Reassemble everything by reversing the removal steps, ensuring all connections are secure before reconnecting the battery.


WHERE IS THE WINDSHIELD WASHER PUMP ON A 2002 CHEVY HEAVY DUTY PICKUP?

Mounted on the bottom of the washer fluid reservoir.