make sure you make a diagram first of your belt before taking it off unplug it from the backside and unbolt it.not sure of the bolt size start with 14,15,16 mm wrenches and go from there .just do everything in reverse to put together
Remove serpentine belt, remove three bolts ,an 2 wires. The alternator will pull up off the motor to remove. Put new alternator in replace bolts, replace wires, an replace the serpentine belt..
You don't. It doesn't have one.
under the air filtre box
Take it to the dealer.
how do you replace a wheel bearing on an 1985 oldsmobile regency 98
how do you replace a wheel bearing on an 1985 oldsmobile regency 98
sounds like a bad ground
how do you replace a heater core in a 91 Oldsmobile 98
If you look under the car it is by the passenger side tire
The 1998 Oldsmobile Intrigue throttle position sensor is held in place with two retaining screws. Remove the retaining screws and the wiring harness. Reverse the process to install the new throttle position sensor.
u need a new high/low switch
To change the alternator on a 1984 Oldsmobile 98, first disconnect the negative battery cable to ensure safety. Remove the drive belt by loosening the tensioner or adjusting the alternator's position. Disconnect the electrical connectors from the alternator, then unbolt it from the engine. Install the new alternator by reversing these steps, ensuring all connections are secure and the drive belt is properly tensioned.