remove the fender liner. probably have broken studs. they usually come out
easily. a left hand drill bit works good if they're flush.
The exhaust back pressure sensor on a 2006 6.0 diesel Ford F3 50 can be located near the exhaust manifold. The sensor is a probe that can be removed by loosening the nut.
Feel the exhaust manifold at each cylinder as it is running, if an injector isn't working the manifold at that cylinder exhaust port won't get hot. Some of those Ford diesels had a problem with the electrical connection where the injector harness passes through the valve covers.
On a 2005 Ford F350 with a diesel engine, the EGR (Exhaust Gas Recirculation) valve is typically located on the driver's side of the engine, near the turbocharger and intake manifold. It is mounted to the intake manifold and connected to the exhaust system via pipes. Accessing it may require removing certain components for better visibility and reach. Always consult the vehicle's service manual for specific details and procedures.
How do you change the alternator on a 1996 ford F350 diesel
On a 2008 Ford F-350, the EGR (Exhaust Gas Recirculation) cooler is located on the driver's side of the engine, typically mounted to the rear of the engine block. It connects to the exhaust manifold and the intake manifold, allowing exhaust gases to be cooled before being recirculated into the intake. Accessing the EGR cooler may require removing components like the intake manifold or other related parts for proper service.
8X6.5in
It is part of the exhaust system before the muffler under the vehicle
On a 2006 Ford F-350 diesel, the exhaust gas pressure sensor is typically located on the exhaust manifold or near the turbocharger. It is usually positioned in the exhaust system, often on the driver's side, close to the EGR (Exhaust Gas Recirculation) system. Accessing it may require removing some components for better visibility and reach. Always consult a repair manual for precise location and installation details.
I need a diagram of ford F350 drum brakes on 1996 model 460 engine 4 wheel drive
yes you can BUT it has to be a larger pipe to get the turbo sound out of it
The plug should be hidden in the bumper in the vents.
the model year 1992-1996 the tailgates and body styles for the f150, f250, and f350 were that same and the 1997 f250 and f350 were the still the same design. The f150 however were not. so in short it will fit a 92-96 f150, or a 92- 97 f250 or f350.