answersLogoWhite

0

First remove the steering wheel, remove the torx screws and remove the house, remove the signal switch and the wiper switch, remove the torx screws and?æremove the ignition switch. Put in the new switch and replace everything in reverse.?æ

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How Do You Replace Ignition In 1992 Cavalier?

how do you replace ignition switch on a 1992 Chevy cavalier 2.2 4 cylinder


How do you replace ignition switch on a 1992 Pontiac Bonneville?

How do you replace the ignition swith opn a 1992 Pontiac Bonneville se


How do you replace the ignition switch 1992 Oldsmobile 98 regency?

this site is great


How do you replace the ignition switch on a '92 Plymouth Colt?

The 1992 Plymouth Cold ignition switch is held in place by a retaining ring. Remove the retaining ring at the top of the ignition switch. Pull the ignition switch out. Remove the wiring harness from the ignition switch. Reverse the process to install the new ignition switch.


How do you change the ignition switch on a 1992 g20 Chevy van?

Begin by removing the retaining ring at the top of your 1992 Chevy ignition switch. The ignition switch will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.


How do you remove ignition switch from 1992 Ford Explorer?

Type your answer here... How do you remove ignition switch from 1992 ford explorer?


Why would your 1992 Chevy van 4.3 start an idle then die?

ignition switch probably bad.After starting,turn the ignition switch back just enough so your not engaging starter.If it stays running replace switch.


How do you replace an ignition switch on a 1992 Pontiac Grand Prix?

The switch is on the steering column about 18 inches from the floor under the dash. There are 2 screws that hold it on.


Where is the ignition switch located on a 1992 VW?

the ignition switch is the key and its on the stering collem or on the dash


How do you change ignition on a 1992 sierra?

To change the ignition on a 1992 GMC Sierra, first disconnect the battery to ensure safety. Remove the steering column cover and locate the ignition switch, which is typically near the top of the column. Disconnect the wiring harness and unbolt the ignition switch from its mounting. Replace it with a new switch, reattach the wiring, and reassemble the steering column before reconnecting the battery.


1992 Acura Legend Car cranks but when you let go of the key it shuts off?

Your ignition switch is worn out. you will need to replace it.


Replacing a ignition switch in the dashboard of a 1995 4- Runner?

pics of 1992 4runner ignition switch