To replace the distributor on a 1993 Ford F-150, first disconnect the battery and remove any obstacles that obstruct access to the distributor. Mark the position of the existing distributor for proper alignment, then disconnect the electrical connector and any vacuum lines. Unbolt the distributor hold-down clamp and carefully lift out the distributor, ensuring the rotor's position is noted. Install the new distributor by aligning it with the marks made earlier, securing it with the hold-down clamp, and reconnecting all electrical components and vacuum lines before reconnecting the battery.
Could be the ignition module. It's attached to the side of the distributor.
how to replace an oil pan that goes to a ford f150 1993? how much does the pan cost,and can you show a picture of it?
What question
How do you remove and replace the battery on a 2001 Ford F150?
take off the distributor cap see what you find.
Yes but you must eather remove the transmittion or move it back enough to be able to work.
Is there a picture of distributor cap firing order for 2003 ford f150 4.2 engine
First, remove the windshield wipers. Then you can remove the cowel just in front of the windshield. There are a bunch of screws connecting it to the firewall. Once you remove this, close the hood. Now everything is easily accessible and the rest is intuitive. Replace everything by using the opposite procedure.
how to replace oil pan gasket on 2007 f150 5.4 trition
Remove the calipers, then the caliper frame, rotor is now free.
you remove plastic red/white cover with 2 screws and remove bulbs.
Remove wireUnscrew old one and replace