A battery terminal or a battery CABLE terminal. If the terminal is gone or destroyed on the battery, you need a new battery. If the cable terminal is terminal, you can buy an after market replacement or a complete new cable with terminal at most any auto parts store.
On a 2004 Mercury Sable : The battery is in the drivers side of the engine compartment at the front
On a 2001 Mercury Sable : The battery is located in the front of the engine compartment , on the drivers side
To replace the valve cover gasket on a 1997 Mercury Sable, first disconnect the negative battery terminal and remove any components obstructing access to the valve covers, such as the air intake or electrical connectors. Then, unbolt the valve cover using a socket wrench, carefully lift it off, and clean the mating surface. Replace the old gasket with a new one, reassemble the valve cover, and torque the bolts to the manufacturer’s specifications. Finally, reconnect any removed components and the battery terminal.
what is the cost to replace the rack and pinion on a 1994 mercury sable
your battery was dead.
36R
36R
1999 mercury sable horn replacement
First you must disconnect the negative(-) pole, then disconnect the positive(+), connect the new battery begining with the positive(+) pole, then the negative one.
There are several reasons why a Mercury Sable may not start. Some of the reasons are no gas, a bad battery, or a bad starter.
Sounds like the battery is too weak to turn the starter, or you have a bad battery terminal connection. Take the battery cables loose and clean them then re-attach. If it still doesnt start, charge the battery or take it to parts store to get it checked.
Take out the battery.