answersLogoWhite

0

The switch is above the brake pedal-- new one at parts store for under $10.00... unplug the lead to it, pull small pin on brake pedal shaft with needle nose pliers, slide off plastic washer and plastic bushing, switch will slide off the shaft. Reverse the procedure to assemble, plug in switch, make sure it's working before you button every thing back up.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you bypass a broken brake light switch on a Mercury grand marquis?

Why ? Just replace it.


Why is it that 1996 mercury grand marquis wont shift out of park?

check your brake lights if they not worhing replace fuse or brake light switch


Why would your brake light be on 1989 mercury marquis?

Brake light switch stuck, defective, or out of adjustment.Brake light switch stuck, defective, or out of adjustment.


How hard is it to replace the stoplight switch on a 1995 mercury grand marquis?

Not very hard. You have remove the panel that is under the dash. It should be a big black panel. The switch is on the brake pedal. Remove the two wires to the switch and unscrew it and replace it and reverse the order and you are done.


What happen when you cant get out of park in mercury grand marquis?

THE BRAKE LIGHT SWITCH IS NOT PUTTING OUT BATTERY WHENEVER THE BRAKE PEDAL IS PUSHED DOWN. CHECK TO SEE IF BRAKE LIGHTS COME ON WHEN BRAKE PEDAL IS PUSHED DOWN. IF BRAKE LIGHTS COME ON, THEN YOU SHOULD BE ABLE TO SHIFT IT OUT OF PARK. IF NO BRAKE LIGHTS, THEN IT WON'T SHIFT OUT OF PARK. IF THIS IS THE CASE, THEN REPLACE BRAKE LIGHT SWITCH.


How do you change a brake light switch on 1996 Mercury Grand Marquis?

on the arm of the brak pedal there is a rod pinned to the arm along with the switch. pull the clip out with pliars and slide the pin out half way , then lift the switch out. unplug it and replace. install is just the opposite.


Why do the brake lights stay on 2001 mercury villager?

This is usually cause by a stuck brake light switch on the brake pedal. Replace it.


How do i replace a brake light in a 1997 mercury grand marquis?

Remove the wing nuts from inside the trunk, the assembly will pop out.


Is there a way to bypass the switch that allows the shifter to shift out of park when you depress the brake on a 1993 Mercury Grand Marquis?

Find the switch attached to the brake pedal for the shift interlock and jump the two wires together. Be careful not to disconnect the brake light switch


Where is the brake light switch on a 1987 mercury grand marquis?

The brake light switch is under the dash hooked to the brake pedal at about midway up. It is a little switch that is like a push button that goes "CLICK" when activated, sending a pulse to the lights telling them when to turn on and off.


How do you bypass the brake safety switch on a 1990 Mercury Cougar?

just replace it this switch might also be the boo switch that sends the signal to the computer


What does the brake light switch control a 1994 Mercury Grand Marquis?

Your Brake Lights. It's mounted on the Steering Column and is very easy to change. Around $10 at your local parts store.