To replace the brake lines on a 1966 Plymouth Fury, first, safely lift the vehicle and secure it on jack stands. Remove the old brake lines by loosening the fittings at both ends and carefully detaching them from the brake components. Install new brake lines by routing them along the original path, ensuring they are secured with brackets. Finally, bleed the brake system to remove any air and check for leaks before taking the vehicle for a test drive.
Loosen brake lines on master cylinder. Dont take off brake lines yet! Get under steering wheel, under the dash and look by the steering column. There will be 4 nuts. Take off the four nuts. Take brake lines off master cylider. Take out brake booster and master cylinder as one unit.
The 1966 satellite was a B body. It was Plymouth's version of the Dodge Charger.
Hi there. Did you ever get info for this problem? I have a similar problem
Plymouth Meeting Mall was created in 1966.
to the left of the brake pedal
Most of them are located inside the brake drums.
Non-synthetic brake fluid.
Try Hemmings Motor News
325-330 hp
It should be the back
The OEM tank held 19 gallons. It will have to be an OEM type tank or it will not fit. You can buy a replacement at the link I will post.
In 1966, a total of 1,946 Plymouth vehicles were built in paint code 221, which is known as "Turquoise Poly." This color was part of the broader range of options available for that model year, contributing to the distinct appearance of Plymouth cars during that era.