On my late year 1999, which should be the same, there are four pins. Two in each hinge. The ones in my truck are not removable without a reciprocating saw. I had to cut the bottom off the pins and the top of the top pin on each hinge and then put the part in a vise to punch the remainder of the pin out. The new kit I found was not high quality and I twisted off the first one while tightening the nut to pull the splines into the bracket. I had a second kit for the bottom and even though the two kits had the exact same part number from the same supplier, they were totally different. The second kit did not have nuts but rather c-clips to retain the pins. I did manage to get it done after dropping my door and scratching the paint. I highly recommend having a helper.
It unbolts from the inside of the door, so, you have to pu;ll the little inside panel. It just pops out.
how to replace actuator on a 2000 malibu
If the 2000 is the new body style then YES it will.
Replace door moulding
Are the door interchangeable on an 1987 chevy truck and an chevy blazer 1988
You will have to remove the entire door panel to get at the screws that hold the handle assembly to the panel.
You need to remove the entire door pannel. There are manuals that show you how to do it.
YES.
yes it should fit
maby you should Expierement on it or go ask google ok sorry.
Length of back brake line to replace. hole in it between front and back door
YES. That would be a direct swop.