0
Unbolt calipers from bracket, suspend with wire hanger so you don't stretch out or damage brake line. unclip & remove old pads. Install the same way. You have to separate the pads with some implement to open them up & push pistons back in bores then slip on over rotor & put bolts back in. All pads the same pay attn to how clips go, do 1 side at a time & use the other for reference. if you have deep grooves in your rotors, they should be done as well. Have fun.
What else can I help you with?
How thick are new front brake rotors on a 2010 Ford Ranger?
What should the thickness be on the front brake lining for ford ranger 2010
How do you replace front wheel bearings on a 2000 Ford Ranger?
how do i replace front wheel bearinbs on 2000 ford ranger 4wd
How do you replace the front brakes on a 1995 ford ranger?
What are the brake rotors minimum thickness on a 1997 Buick Century? Thanking you in advance.
How do you replace the rear brake shoes on an 1989 Ford Ranger?
Take it to a garage and ask them "Can you replace my brake shoes please"
How do you stop front brake vibration on a 1997 ford escort?
replace front brake discs and pads.
How do change front brake pads 2005 ford ranger?
To change the front brake pads on a 2005 Ford Ranger, first, lift the vehicle and remove the front wheels. Next, remove the caliper by unbolting it and carefully sliding it off the rotor. Replace the old pads with new ones, ensuring to compress the caliper piston if necessary. Finally, reassemble by reinstalling the caliper and wheel, then lower the vehicle.
How do you stop a front oil seal leak on an '87 Ford Ranger?
Replace it.
How do you change the front brake pads on a 1997 ford ranger?
Take off tire first
How do you replace front brake pads on 2002 mustang?
To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.
How do you replace the brake light bulb in a 1996 Ford Ranger?
To replace the brake light bulb on a 1996 Ford Ranger is very simple. There are four bolts that hold the housing that will need to be removed. After the bolts are removed, the wires connector needs taken off and then the bulb can be twisted out.
How do you replace the front bearings on a 2000 ford ranger?
Wheel bearings? 4X4 ? 4X2?
What type brake fluid for Ford Ranger 93?
For a 1993 Ford Ranger : ( DOT 3 brake fluid )
