Remove the switches and a couple screws that hold the door panel on. then pry the push in door clips that hold the door panel in place out. take the screws out of the old speaker and cut off the pigtail attached to it. solder and shrink wrap or crimp on the new wire connectors that came with the speakers and re-install.
The front speakers are 6x9" and the rear speakers are 5.25".
For a 1998 Dodge Ram 1500 extended cab, there are two different sizes of speakers. The front speakers are 6x9 and the rear are 5-1/4.
6x9 in the front doors, 5.25" in the rear doors. The stock infinity speakers are problematic.
6x9 ovals in front doors, 4" round in extra cab doors
the front speakers are 6 by 9 but im not sure abot the ones in the back!! I believe the back speakers are 5 1/2 inch round
Front door speakers are 6x9 but after market will not fit unless you have at least a 3/4 spacer. Back door speakers are 5 1/2.
pop the cover take 4 screws out & put your new 1 in
front drive shaft, how do you get the yoke out of the transfore case to replace the ceal?
Should be 6.5
The 2000 Ram had u joints, not cv joints at the front axle.
No.No.
6x9