0
You've got to drop the fuel tank, or cut an access opening in the body tub over the fuel tank inlet. Besides the sending unit, you will almost certainly need the lock ring that attaches it to the tank also. There is the distinct possiblity the rust in that area is so bad the tank will need to be replaced.
What else can I help you with?
How do you replace a fuel pump on a 1985 Jeep Cherokee?
Where is the fuel pump located on a 1985 jeep cherokee
How do you replace the fuel sending unit on a 1996 Jeep Cherokee?
http://www.partstrain.com/
How do you replace fuel gauge sending unit on 1998 jeep wrangler se?
1997-2206 JEEP TJ Wranglers have the combination fuel pump assembly and fuel gauge sending unit located inside the gas tank. The gas tank needs to be unbolted and removed to access the fuel pump assembly.
Where is the fuel sending unit in a 1993 jeep wrangler?
In the fuel tank
How do you change the fuel sending unit on a 1981 CJ7 jeep?
To change the fuel sending unit on a 1981 Jeep CJ7, first, disconnect the battery and drain the fuel tank. Remove the fuel tank by unbolting it and disconnecting the fuel lines and electrical connectors. Once the tank is out, take off the sending unit by removing the retaining ring and lifting it out of the tank. Replace it with the new unit, reassemble the tank, and reconnect everything.
1992 Jeep YJ Have a strong fuel odor but find no visible leaks Where should you look?
there was a factory recall on '92 jeep to replace a fuel pump or sending gasket. Had it done on mine. Also check hoses and fuel filter that are near gas tank
How do you replace the fuel level sensor on a 1998 Jeep Grand Cherokee?
You are not going to like this answer. You have to drop the fuel tank to replace the fuel sending unit. The fuel pump, filter and fuel sending unit are a modular assembly. You might want to leave this job to the pros due to the hazards involved with working with fuel vapors. I had mine done Last year at a non-Chrysler, Jeep Dealership under an oil company insurance damage claim for around $ 300.00. The parts were fairly expensive.
How do you replace the fuel sensor on a 1998 Jeep Grand Cherokee?
You are not going to like this answer. You have to drop the fuel tank to replace the fuel sending unit. The fuel pump, filter and fuel sending unit are a modular assembly. You might want to leave this job to the pros due to the hazards involved with working with fuel vapors. I had mine done Last year at a non-Chrysler, Jeep Dealership under an oil company insurance damage claim for around $ 300.00. The parts were fairly expensive.
How do you replace the fuel sending unit on a 2002 impala?
The fuel sending unit is part of the fuel pump module. To replace it you must drop the gas tank.
How do you install fuel sending unit in 1995 Chevy S10?
how do you replace the fuel sending unit
How do you replace the fuel pump on a Jeep Wrangler?
You have to drop the fuel tank from the jeep. The pump is inside
How to replace fuel pump on 1985 Chevy blazer s-10 4x4 2.8?
the fuel pump is in the tank on the sending unit you may need to drop the tank to access it
