0
The bulb is held in by a metal wire. The wire is secured by a plastic clip at the top. Once unclipped the wire hinges down. To unclip the wire. You have to look at the very top and find the end of the wire (it is a little loop). You have to push this little loop with your finger back and to the left or right (depends on what side of the care you're on). Doing this will unclip it from the plastic piece. You should then be able to swivel/hinge the wire down. Then you can pull the bulb out and change it. Then just hinge the wire back up and clip it back at the top when you put the new bulb in. (You'll probable need a mirror to be able to see the little loop you need to push the first time.)
*****************
YES! THANK YOU! After years going nuts replacing my '02 Focus headlamp bulbs, tonight was the first time I easily did it! My '02 Focus user manual does not mention you have "push" the clip back first to dislodge it. After that step you can swivel it away so the the bulb can be removed. ONE SUGGESTION: Once I removed the bulb cover it was hard to see where the wire clip "loop" was located. I don't have a small mirror so tonight using a digital camera (or try a cell phone camera), I took a picture of the bulb housing so I could see where the wire clip "loop" was positioned which helped. Thank you again!
What else can I help you with?
How do you replace headlight bulb in 2001 Porsche boxster?
http://www.bombaydigital.com/boxster/projects/headlamp/
How do you replace the headlight bulb on a 2001 Pontiac Grand Prix?
See posting for "How do you change the headlamp bulb in a 2003 Grand Prix?" All these model years are similar in production for the headlamp assembly.
How do you remove headlamp to replace bulb in 2001 town and country Chrysler?
Open the hood. There are three hex head bolts that hold each headlamp to the van. Remove each bolt and gently pull headlamp out from grill using the small handle-like grip. The headlamp will remain connected to the van with the lightbulb socket. Twist the collar away from the bulb then pull the bulb assembly out of the headlamp. Replace bulbs and reassemble components.
How do you replace the headlights on a 2001 Ford Focus?
Are you asking how to replace the entire headlight assembly -OR- how to replace just the headlight bulb? Just the bulb.
How do you replace headlamp bulb on 2008 Kia Amanti?
To replace the headlamp bulb on a 2008 Kia Amanti, first, open the hood and locate the back of the headlamp assembly. Disconnect the electrical connector from the bulb and remove the retaining clip or twist the bulb socket counterclockwise to release it. Replace the old bulb with a new one, ensuring not to touch the glass with your fingers, and then reassemble by reversing the steps. Finally, test the headlamp to ensure it is functioning properly.
How do you change the headlamp bulb on 2001 Mitsubishi eclipse?
you don't
How do you change headlamp bulb on 2001 mustang?
look in your manual
How do you replace a 2001 Lexus is300 headlamp?
To replace the headlamp on a 2001 Lexus IS300, first, open the hood and locate the headlamp assembly. Disconnect the electrical connector from the back of the headlamp and remove any retaining clips or screws holding the assembly in place. Carefully take out the old bulb and insert the new one, ensuring not to touch the glass with your fingers. Reassemble the headlamp by reversing the steps, reconnecting the electrical connector, and testing the new headlamp.
How do you replace headlamp bulb on an Audi a6 2008 model?
with your hands ?
How do you replace the headlamp bulb in a Mercedes A140?
ask someone else to do it
How do you change headlamp bulb 2002 ford focus?
take it to a trained mechanic?
How replace headlamp citroen xantia?
To replace the headlamp on a Citroën Xantia, start by opening the hood and locating the headlamp assembly. Remove the screws or clips securing the headlamp, then carefully pull the assembly out. Disconnect the wiring harness and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the wiring, and secure the headlamp assembly back in place before testing the new bulb.
