0
real easy open the hood ,on top of the light are 2 screws 7MM on is about 1" long the other 5" long remove both screws now gently pull the light assembly out by lifting the bottom out side and pulling forward , it will take a little wiggling but it will come out. then remove the black collar around the light by turning loose the ring ,now pull the bulb strait out note how it is sitting in the hole. next do not touch the glass on the new bulb you skin oil will cause it to burn out much faster, insert bulb and reinstall in reverse order ,making sure the assembly is in so the long screw gos through the hole in the bottom on the light assembly tighten bolts and turn on lights TEST !your done .
What else can I help you with?
Dead battery in 1997 Chrysler Sebring convertible?
Charge it, test it, replace it.
When to replace the Timing belt in a 1997 Chrysler Sebring convertible jxi?
100,000 miles
DO you have to drop the fuel tank on a 1999 Chrysler Sebring convertible to replace the fuel pump?
Yes
When should you replace the timing belt on a 1999 Chrysler Sebring JXi Convertible?
100,000 miles
How do you replace windshield washer pump Chrysler sebring convertible?
The windshield washer pump on a Chrysler Sebring convertible is replaced by disconnecting the wiring harness and unbolting the pump. It can then be lifted from its mounting bracket and a new pump put into place.
How do you replace the alternator in a 2000 Chrysler Sebring convertible?
When replacing the alternator on a 2000 Chrysler Sebring convertible begin by removing the belt. Next, remove the wiring. Lastly, remove the retaining bolts. Reverse the process to install the new alternator.
Can you replace a 2.7L engine in a 2002 Chrysler Sebring convertible with a 3.0L from a same year Chrysler Sebring coupe?
It is not a direct swap. They use different transmissions, computers, wiring, etc.
How long should labor take to replace a water pump in a 1996 Chrysler Sebring Convertible?
6 hours
How do you replace the starter on a 2001 Chrysler Sebring convertible?
Remove the positive battery cable from your 2001 Chrysler Sebring battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
DO you have to drop the fuel tank on a 1998 Chrysler Sebring convertible to replace the fuel pump?
Yes. The fuel tank must be removed to access the pump.
Will a home link visor work to replace a regular visor in 1998 Chrysler Sebring convertible?
It will bolt up, but I do not think you will have the power electrical connector.
How do you replace a Chrysler Sebring 2001 Cabin Filter?
A 2001 Chrysler Sebring does not have a cabin filter.
