Cut off the crimp connectors, pull the old hose off and replace with conventional heater hose and conventional hose clamps
LOTS - it is virtually inaccessible .
your heater core is leaking i would replace it.
To replace the heater valve on a 2001 Ford Fiesta, first, ensure the engine is cool and disconnect the battery. Drain the coolant from the cooling system, then locate the heater valve, which is typically situated near the firewall. Disconnect the hoses attached to the valve, remove any mounting screws, and replace it with a new valve, reattaching the hoses securely. Finally, refill the coolant, reconnect the battery, and check for leaks.
you need to replace your heater core take the heater hoses off and lope them with a piece of tubing and drive you will see what i mean
In line on the heater hoses on the passenger side of the engine. Has a small vacuum line to it and both heater hoses go through it. The heater hoses are smaller than the radiator hoses and go through the firwall.
how do i replace a heater core in a 2001 Chevrolet blazer
do u have a diragram
singal relay where 2001 Taurus
To remove the heater hoses on a 2001 Silverado, start by ensuring the engine is cool and then locate the heater hoses connected to the firewall and engine. Use pliers to loosen any clamps securing the hoses, then carefully twist and pull the hoses off their fittings to avoid damaging them. If the hoses are stuck, you may need to cut them off, but be cautious not to damage the fittings. Finally, clean the fittings of any debris before installing new hoses.
How to replace a heater hose on a 2001 Oldsmobile silloute
To replace the heater core on a 2001 Chrysler PT Cruiser, begin by disconnecting the battery and draining the cooling system. Remove the dashboard and the center console to access the heater core housing. Disconnect the hoses and remove the screws or clips securing the heater core in place. Install the new heater core, reassemble the dashboard and console, and refill the cooling system before reconnecting the battery.
In behind the glovebox.Easily accessible and an easy replacement if one fails.See "Related Questions" below for diagnosing blower problems, fuses, how-to replace and more...