0
What else can I help you with?
1998 Chey Camaro SS headlights will not switch to low beam it is stuck in high beam mode?
you will probably have to replace the headlight switch.
Replace high beam switch 1996 Subaru outback?
how to replace high/low beam, turn signal lever on 1996 subaru outback wagon
How can you replace a beam headlights control impala 2002?
Take it to a dealer. There's no way you'll do it. Proud owner of one.
Your 1997 Pontiac sunfire low beam headlights don't work but the high beams do?
Low beam bulb burnt out? Replace bulb. Bulbs OK? If the dimmer switch is also the turn signal/cruise/headlight on and off switch, you probably have to replace the entire switch.
In my 2000 Chevrolet Impala my hazard and blinkers dont work all the time could it be my flasher needs to be replaced?
check fuses first... but chances are the flasher, which IS the hazard switch, is faulty... simple to replace ... just remove the left and right fuse box covers and the main dash panel.... replace switch and reinstall panels... be careful of the high beam switch because it seems to get in the way
You own a 2000 Chevy impala your low beam?
what about the low beam?
Where is the fog light switch located on a 2001 expedition?
Turn your headlight switch so your low beam headlights come on and then pull the switch towards you
Why does Low beam not work but high beam works?
Replace your dimmer switch and this should fix your problem Or both bulbs could be bad
When i turn on brights on my 05 impala low beam goes out?
When i turn on brights on my 05 impala low bean goes out
How do you replace high beam switch on 88 caprice?
To replace the high beam switch on a 1988 Caprice, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws that hold it in place. Then, locate the high beam switch, which is typically mounted on the steering column; disconnect the wiring harness and remove the switch. Install the new switch by reversing the steps, reconnecting the wiring harness, and reattaching the steering column cover.
You have no dipped beam on ns peugeot 406 its not the bulb or fuses Main beam and side lights still work on both sides what next?
replace high/low beam switch
MB 190E 2.3 1993 both high and low beam lights stay on If shift the high beam switch on sterring wheel the fuse blow If you remove fuses for high beam the regular beem work well but you have no high?
you need to replace the high/low beam switch
