Those are pressure fitted with a special tool. Your better off bringing your truck to a automotive repair shop to have them done. I couldn't find the right tool to do the job anywhere.
There are two ports on the air conditioning compressor on the Mercury Mountaineer. The refrigerant to recharge the system is to be connected to the lower port.
You lift the vehicle and lower the fuel tank. The fuel sending unit is removed from the top, and the pump can be wiggled out of the unit.
You can't service the lower ball joints by themselves. You must replace the entire lower control arm.
Lift the car, remove the tire, remove the brake shoe/caliper, and remove the old brake pads. Put in the new brake pads, replace the brake shoe/caliper, replace the tire, and lower the car.
how to replace lower ball joints on 1995 4 wheel drive Nissan truck
On the exhaust pipe, lower, possibly near the catalytic converter.
You can replace just the ball joints on the lower control arms , but the upper ball joints come with a new control arm
If you need to replace the lower ball joints, check your owners manual for instructions. The manual should show you the location and how to complete the repair.
Change lower ball joints on a 96 gmC 4 by 4
which ones? upper or lower?
I believe the lower balljoints can be changed , but the upper control arm assembly with the balljoint has to be changed
The computer module in a 2003 Mercury Mountaineer is located behind the rear right panel in the truck space. The rear right seat belt panel must be removed and then the lower panel. The module is located beneath a green plug.