Door Mirror There is a triangular shaped piece of interior door cover (upper front portion of interior door cover) just gentle pull this piece towards you until it pops off, then remove the sponge material from the hole under the cover you just removed, there are now three nuts holding the mirror in place, remove the nuts and any wires attached to the mirror and gently pull the mirror away from the door. ****Warning**** do not drop the mirror nuts while removing them, they will fall inside the door assembly, to recover them requires removing the entire interior door cover.
Check out the guide to replace the side mirror on a 2001 Ford Expedition http://www.techwarelabs.com/articles/other/Ford_Expedition_Side_Mirror_Replacement/index.shtml
Go to this website. It will show how to remove the door panel and the side mirror.
if you take off the door panel there will be three studs that connect the mirror to the door
if you take off the door panel there will be three studs that connect the mirror to the door
how do you replace a drivers side mirror on a el ford falcon
Sure you can. Just do a google search for passenget side mirror - Ford explorer. It will run about $50.
To replace the passenger side mirror on a 2002 Ford E350, start by removing the interior door panel to access the mirror's mounting bolts. Disconnect the wiring harness if the mirror is powered. Unscrew the old mirror from the door, then align the new mirror and secure it with the bolts. Finally, reconnect the wiring and reattach the door panel.
Go to the following website. It will show how to remove the door panel and the side mirror. kwmuth.com
Throw a hammer at it and buy a ford sucka!!!!!!!!!!!!!!
I know yours is not a 2001 Ford Expedition. Nevertheless, they are similar. Anyways check out the related links below for the Side Mirror Replacement.
* Remove the mirror trim cover from the door panel * Remove the three mirror retaining nuts and detach the mirror from the car
Remove the plastic cover on the inside behind the mirror and then remove the three nuts holding ther mirror on. When you pull out the mirror unclip the wiring harness.