To replace the radiator in a 2008 Chevy Malibu, first, ensure the engine is cool and disconnect the battery. Drain the coolant by removing the drain valve at the bottom of the radiator, then disconnect the upper and lower radiator hoses, as well as any electrical connectors. Remove the mounting bolts securing the radiator and lift it out. Install the new radiator by reversing the removal steps, reconnect the hoses and electrical components, refill the coolant, and check for leaks before starting the engine.
There are NO chassis lube points on a 2008 Malibu!
what kind of motor oil for 2008 malibu 2.4
i donno.
2
replace fuel filter 2008 Chevy silverado
Pull the complete headlight assembly out to get to the bulbs. You first have to pull the front bumper off, along with the wheel well to get to the headlight assembly.
The cost to replace a water pump on a 2008 Chevy Malibu, including labor, typically ranges from $500 to $800. Parts alone usually cost between $100 and $300, while labor can add an additional $400 to $500, depending on the shop's hourly rate and your location. It's advisable to get multiple quotes from local mechanics for a more accurate estimate.
If you want a metric speedometer simply hold the info+return buttons down simultaneously for a few seconds, then you can switch to imperial units and vice versa. The better question is "where was that in the manual?" lol
Mine won't answer either!! help!
is a chevy 2008 malibu flat towable
4 U. S. quarts
The weight of a 2008 Chevy Malibu varies depending on the specific model and trim. Generally, it ranges from approximately 3,200 to 3,400 pounds. Factors such as additional features and engine options can slightly affect the overall weight.