u need to either get the car car jacked up to pass underneith it or 2 of 3 behind the motor are middly accessible w/wrench.Go to a repair shop if no jack is available(dont do like me ived stripped the wires in the back of the mototr so had to change wires and spark plugs.GOOD LUCK!
how to replace spark plugs wires 1992 buick century v 6 3300 stationwagon
It is important to replace old spark plugs to keep a car engine running well. To replace them disconnect the battery, remove the cables, remove the old spark plugs, replace with the new spark plugs, replace the cables in the correct order, and connect the battery.
Remove the spark plugs wire and remove the plugs wit a spaerk plug wrench or socket.
plugs wires
Disconnect the battery, remove the spark plug cables and boots, and remove the old spark plugs. Put in the new spark plugs, attach the boots and cables, and connect the battery.
Replace Spark plugs Replace Wires Replace fuel Filter Replace PCV Valve Replace air Filter
Disconnect the battery, remove the boot cover and spark plug cables, and pull out the old spark plugs. Put in the new spark plugs, replace the boot cover, and spark plug cables, and reconnect the battery.
Disconnect the battery of the car, remove the cables and boot covers, and remove the old spark plugs. Put in the new spark plugs, replace the cables and boot covers, and connect the battery.
To change the spark plugs on a 1994 Buick Century, first, ensure the engine is cool and disconnect the negative battery cable. Remove the ignition coil or spark plug wires carefully, taking note of their order. Use a spark plug socket and ratchet to unscrew the old spark plugs, then install the new plugs by hand to avoid cross-threading, and tighten them to the manufacturer’s specifications. Finally, reconnect the ignition coil or spark plug wires and the negative battery cable.
If it's a 6 cylinder , 6 , if 8 cylinder , which I think Buick does not make in that model , it would be 8 .
How do you replace the spark plugs on a Peugeot 307?
To replace the spark plugs on a 2007 Buick LaCrosse, first, ensure the engine is cool. Remove the engine cover if necessary, then disconnect the ignition coils by unscrewing them and pulling them out. Use a spark plug socket to carefully unscrew and remove the old spark plugs. Before installing the new plugs, check the gap and adjust if needed; then, install them, reattach the ignition coils, and replace the engine cover.