I found it easier to pivot engine forward, (pk brake on, shifter in neutral), remove alternator (disconnect all terminals on alt), and use swivel spark plug socket (most places carry these now) and extension on driver. You still have to do alot by feel but patience helps. when i did mine i jacked up the van set parking brake put the trans in netrul and took off the motor monts on the radeator support the i used a rachet strap from the motor mount to the bumper to roll the motor forward removed the coil pack and was in there it took me about 45 min to change the back 3 and put it back together
One at a time
Jack up vehicle and change the rear plugs from underneath!
To change the rear spark plugs in a 2005 Pontiac Montana, first ensure the engine is cool and disconnect the battery. Remove any necessary components obstructing access to the rear spark plugs, such as the engine cover or intake manifold. Use a spark plug socket to carefully unscrew and remove the old spark plugs, then insert the new plugs, ensuring they are properly gapped and torqued to the manufacturer’s specifications. Finally, reassemble any removed components and reconnect the battery.
they did make a sunbird in 1998!
how to chang spark plugs in a 1992 Pontiac grand prix
How do you replace the spark plugs on a Peugeot 307?
Yes, changing the three back spark plugs in a 1999 Pontiac Montana typically requires some maneuvering around the engine. You may need to remove components such as the intake manifold or other parts that obstruct access to the rear spark plugs. It's advisable to consult a repair manual for your vehicle or seek assistance from a professional mechanic for the best approach.
How to replace spark plugs in a 1989 jeep cherokee?
Check you spark plugs. Probably going to need to replace them.
Take old spark plugs out put new spark plugs in
how to replace spark plugs on 2006 camry LE
To replace the rear spark plugs of a 2007 Arcadia, you will need to lift the car and replace the spark plugs from the bottom. You will also need to lower the front cradle for proper installation. This will allow easy access to remove and replace the spark plugs.