The starter is located under the intake manifold. You will need to remove the EGR tube and the intake air tube from the throttle body. Remove the bolts around the perimeter of the intake manifold and from the passenger side of the engine compartment you can lift the intake up far enough to gain access to the starter. Remember to disconnect the battery negative terminal first. I have used a bungee cord to hang the intake in the air while working on the starter. Remove the two wires leading to the starter and then the two 13mm bolts securing the starter to the engine block. Pull the starter out from under the intake manifold and install the new starter in the reverse order. The intake manifold gaskets are reusable.
Location of starter on Cadillac 1998 eta
wiring a starter for a1992 cadillac seville
How do you replace a front turn signal bulb for a 2000 sts cadillac?"
under intake manifold
If it is the same as the '94 SLS Northstar, Its under the intake manifold. Sounds crazy, but true.
The starter is located under the intake area.
Probably not. The car's inability to start is usually due to a bad or out of adjustment neutral/safety switch, not a bad starter. Wally of Hagerstown, MD
ck
You can get a wiring diagram for a 1997 Cadillac Seville STS at Wiring4Cars. The site lets you search for diagrams by year, make, and model.
the starter is located inside the engine...you will need to open the engine to get to it.
No
how do u replace the heater core