Open the trunk. Locate where the back of the light is. You will see 3 or 4 black plastic wingnuts holding the trunk lining on. Remove those. Carefully peel the trunk lining to reveal the back of the light and 3 or 4 more wing nuts. Remove the wing nuts. The entire tail light assembly will now be removable from the car. Be careful because it is still attached to the car by the wires leading to the lights. You will see that 4 clips attaching the circuit board (the thing that has the wire attached to it) to the tail light assembly. Undo the clips and pull out the circuit board. On the reverse side you will see the light sockets. Locate the bad bulb and replace. The bulb number is on the base of the bulb. If the bulbs all appear to be good be warned that Malibus are notorious for the tail light circuit board going bad. This may have to be replaced.
The bulbs unscrew from the back of the light assy. sometimes you have to remove it to get to the back.
how do you replace a bulb in a fog light on a 2000 maxima?
To change that bulb push the bulb down and turn to take out you may need to unscrew the cover first and replace it with the same bulb
To replace a light bulb on a Malibu Chevrolet, first, ensure the vehicle is turned off and the keys are removed. Open the hood or access the trunk, depending on which light bulb needs replacing. Remove the bulb cover or housing by twisting or unclipping it, then carefully pull out the old bulb. Insert the new bulb, ensuring it's secure, and reattach the cover or housing before testing the light.
When you open the hood look above the headlight for two round plastic caps. Pull these upwards, it releases the light assembly.
Remove tire & inner liner to gain access to head light assembly
where do you find the replacement bulb for a 2001 Chevy Malibu ls for fog light replace ment on the car
afshar13@yahoo.com
you tell me how to change head light bulb on 2009 chevy malibu.
How to replace right from headlight bulb on 2000 ford contour 4 cyl...?
The fog lights on a Chevy Malibu can be reached from under the car. Pull off the old lights and toss out the bulb. Replace with a new bulb and reinsert the light in the fog housing.
To replace the trunk light bulb on a 2000 Jaguar XJ8, first, open the trunk and locate the light fixture. Gently twist or pull the light assembly out of its housing to access the bulb. Remove the old bulb by pulling it straight out, then insert the new bulb into the socket. Finally, reassemble the light fixture back into place and test to ensure it works.