0
first remove the (3) torx bolts from the back glass then remove the (2) 10 mm bolts from the hinge after that its a snap to change out just unplug the old and plug in the new and repeat the process
hope this helps any do-it-yourselfers out there wanting to upgrade their Yukon/Yukon XL(new body style)
as i make more and more improvements to the wife's Yukon i will lst what was done to maybe assist others in upgrading their own full size SUV
thanks,
Sam
What else can I help you with?
What tool to replace brake light bulb in 2007 Chevy truck?
3rd brake light or rear brake lights?
How do you replace brake light on 2007 Ford 500?
From inside the trunk.
How do you replace the third brake light in your 2007 Toyota Avalon?
The third brake light on a 2007 Toyota Avalon is replaced by first removing the rear, retaining screws. The wiring harness can then be disconnect and the light bulb removed.
How do you replace the fog light 2007 Yukon?
To replace the fog light on a 2007 Yukon, first, ensure the vehicle is turned off and the keys are removed. Access the fog light assembly by removing the necessary screws or clips on the underside of the bumper. Disconnect the electrical connector from the fog light, then remove the old bulb from the housing and replace it with a new one. Reassemble the fog light assembly and reconnect the electrical connector before securing everything back in place.
How do you replace a brake light bulb on a 2007 Cadillac CTS?
The brake light bulb on a 2007 Cadillac CTS can be replaced by opening the truck, removing the rear cover, and disconnecting the wiring harness. The bulb can then be twisted, removed, and a new bulb put in its place.
Where are the brake light fuses on a Nissan navara 2007?
You can find the 2007 Nissan brake light fuse in the fuse box. The brake light fuse will be in the second column, third from the top.
How do you change the brake light switch in a 2007 Chevy Colorado it has two switches?
how to change brake light switch in a 2007 chevy colorado
How do you change the high mount brake lite on a 2007 Taurus?
The way that you change a high mount brake light on a 2007 Taurus is by first prying the light assembly from the housing. You then push rearward to remove it from the retaining clips. Next, life the light assembly from the shelf and disconnect the assembly wiring. Replace the light assembly and reverse directions to put the light housing back where it goes.
How do you change the center brake light on a 2007 Pontiac vibe?
To change the center brake light on a 2007 Pontiac Vibe, first, open the rear hatch and locate the access panel on the interior trim near the brake light. Remove the panel by unscrewing or unclipping it, then disconnect the wiring harness from the brake light assembly. Twist the brake light bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble everything by reversing the steps. Ensure the new bulb is securely in place before closing the access panel.
What is the average life of brake discs?
On my 2007 Sonata I had to replace the brake pads and rotors at 57000 miles.
How do you replace the center brake light on a 1998 Honda Accord LX?
Open the trunk, directly below the center brake light is the electrical plug and wire for the light. Depress the small tab on the plug that connects to the bulb in the center brake light. Pull the plug out of the connector. Next, release each of the two tabs on each side of the plug. Enter the back seat of the car and remove the brake light housing. Unscrew the bulb holder from the housing by turning it 1/4 turn counter-clockwise. Replace the bulb, replace the bulb holder, replace the housing (back hooks first then snap into place. Replace the plug into the connector. Test. Rejoice (optional). MPC 12/17/2007
Replace brake pads and rotors on a 2007 f150 super crew cab?
how to replace rea pads on 2007 crew cab f150
