answersLogoWhite

0

You have to take the entire drivers side dash off. Take off the kick panel, the dash trim sometimes looks like wood grain, dash besel, finaly the gauge cluster.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Why would fuel gauge read empty when the tank is full on a 1997 Buick Park Avenue Ultra?

have an experience mechanic test you fuel pump fuel level sensor, which is part of the fuel pump, ground the wires and if the gauge pecks gauge is good. if it don't you have to replace your cluster which is a seal item and must be replaced as a unit. do not try this yourself.


How do you replace the temperature gauge of a 1994 Honda Accord EX?

instrument cluster needs to come out and apart to gain access and replace gauge


How do you replace the oil pressure switch on a 3.8 liter Buick?

A Buick with a 3.8 liter engine does not have an oil pressure switch. There is an oil pressure gauge. The gauge can be accessed by removing the dashboard panel. Unhook the wiring harness to the gauge. Reverse the process to replace the gauge.


How do you replace temperature gauge on a 03 Chevy silverado?

Buy a new Speedometer cluster. The external Temp gauge is extremely rare


How do you replace or repair a broken speedometer on a 92 camaro rs?

If it is the gauge you have to pull the gauge cluster. If it is the cable you have to get under the car and replace it. It will be the only cable on the tranny. Good luck


The speedometer gauge needle goes crazy working on and off and seems that when it happen the transmission doesn't know what shiftings to make?

when that happens you usually just have to replace the instrument cluster when that happens you usually just have to replace the instrument cluster when that happens you usually just have to replace the instrument cluster


How do you repair odometer mileage and trip LCD on 2001 Buick Regal LS?

Remove the instrument cluster and replace the resistors on the circuit board. You can get them from radio shack, an it's not hard to do. While you are in there, I would recommend replacing all bulbs and stepper motors to your gauge needles so you won't ever have to take the cluster out again.


How do you change the gas gauge?

To change the gas gauge in a vehicle, you will typically need to access the instrument cluster or gauge cluster, remove it to access the gas gauge, disconnect the wiring harness and any other connections, then install the new gas gauge by attaching all the connections and securing it back in place. It is recommended to refer to the vehicle's service manual for specific instructions on how to properly replace the gas gauge.


Why does the gauge information on a 1999 Buick Park Avenue read 127psi when other data are normal?

get a new sending unit i had the same problem


Where is fuel gauge for a 1996 Plymouth Breeze?

The gauge is part of the instument cluster ( the part with the speedometer ).The gauge is part of the instument cluster ( the part with the speedometer ).


How do you reset the fuel gauge in a 1998 Buick park avenue in the winter the battery had to be boosted and now the needle is behind the post at E?

There is no reset button for the fuel gauge. Something is either wrong with the gauge or the sending unit in the tank.


How do you relamp your fuel gauge on a 2003 Buick LaSabre?

1. remove the entire dash board 2. remove the instrument cluster 3. change bulb