Working on the SRS can be very hazardous. For this reason I suggest you have this repaired by a professional.
To replace the airbag crash sensor on a 2008 Chevy Silverado, first disconnect the negative battery cable to ensure safety. Then, locate the crash sensor, typically found near the front of the vehicle, either under the hood or behind the front bumper. Remove the mounting bolts and disconnect the electrical connector, then install the new sensor by reversing the process. Finally, reconnect the battery and reset any airbag fault codes if necessary.
There not 1
how do you change the knock sensor in a 2003 Chevy silverado 5.3
replace fuel filter 2008 Chevy silverado
Don't do that!It's a major mistake to do that!The airbag is a safety device.
were is the cam shaft sensor
The 1995 Chevy Silverado coolant sensor is located on the front of the engine. The coolant sensor will be a few inches above the thermostat housing.
how do i reinsert the fuel injectors on my 4.3 Chevy silverado
NO it does not.
you have to pull off the intake they are under there. you have two you might as well replace both
Behind the starter.
unscrew it