Don't be a fool like me and take the dash instrument cover off and break it.
Just unscrew the screws in the ashtray and pull the base out. The bulb is beside the cigarette lighter, twist and pull out, replace bulb, push and twist back in.
how do you replace dome light in s10 chey blazer?
The 1995 Chevy truck did not come equipped with an ashtray light. It may; however, be possible to purchase an after market light to install.
you can find the switch on the back of the brake pedal.
Remove the screws that hold the covers in place. Replace bulbs!
The ashtray light on a Chevy pickup has a replaceable bulb. depending on the model the bulb could be a plug in or screw in type.
How do you reset check engine light for the 2009 Chevy trail blazer?
If the turn signal bulbs light but will not flash, the flasher relay is defective, replace it.
1. Remove ashtray. 2. Remove ashtray track assembly (two screws underneath). 3. Replace bulb. 4. Install ashtray track assembly. 5. Insert ashtray.
Disconnect negative from battery remove four clips from ashtray disconnect lighters and bulb reverse procedure for install
No answer. Haha!!!
To replace the hazard light switch on a 1997 Chevy S-10 Blazer, first disconnect the negative battery cable to ensure safety. Remove the dashboard cover and the screws securing the switch assembly. Carefully disconnect the wiring harness from the old switch and replace it with the new one, then reassemble the dashboard and reconnect the battery. Test the new switch to ensure it functions properly.
b/c light fool