answersLogoWhite

0

To replace the backup lights on a 2004 GMC Envoy, first, open the rear liftgate and locate the tail light assembly. Remove the screws or bolts securing the tail light, then gently pull the assembly away from the vehicle. Disconnect the wiring harness and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the wiring harness, and reassemble the tail light assembly, securing it with the screws or bolts.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How do you replace wheel bearings on 2004 GMC envoy?

how to replace wheel bearings on 2004 GMC envoy?


2004 envoy headlights went out but all other lights are working?

Yes, they did.


2004 gmc envoy back up lights dont work not fuse or bulbs?

I had the same problem with my 02 Envoy. Check to make sure contacts inside the sockets are intact. I had to replace both of mine. Contact were corroded and rusted out.


Replace 2004 rav4 lights?

Which lights are you attempting to replace?


How do you replace an alternator on 2004 envoy?

you take it out and put in a new one


Do you have to take alternator off to replace thermostat in 2004 envoy?

of corse


How much will it cost to replace tires on 2004 envoy?

about 150 dollars


Where is the backup switch on a 2004 envoy GM?

Top of the transmission.. should be offset to the left side and behind the shift tower.


How do you replace a broken radio antena on a 2004 gmc envoy?

To replace a broken radio antenna on a 2004 GMC Envoy you need to unscrew the old antenna. Next, place the new antenna in the hole and screw into place.


How do you replace the dash lights on a 2004 Nissan Quest van?

How do you replace the dash lights on a 2004 Nissan Quest


How do you change a backup light for a 2004 envoy?

To change the backup light on a 2004 GMC Envoy, first, open the rear hatch and locate the tail light assembly. Remove the screws or bolts securing the assembly and gently pull it out from the vehicle. Disconnect the wiring harness, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, reassemble the socket, reconnect the wiring, and secure the tail light assembly back into place.


Why do your 2004 envoy headlights hot work but all other lights work?

If the headlights on the 2004 GMC Envoy are not working, there could be a loose connection somewhere. If all of the other lights are working, it is most likely not a fuse that has blown. Double check the wiring to see if there is a loose connection.