0
What else can I help you with?
Heater fan switch works only on the highest setting?
The blower motor speed resistor is burned out. You can replace only the resistor but the resistor probably burned out because the blower motor is going bad. If you want to fix it for good, replace both the blower motor and blower motor speed resistor.
Where is the front heater blower motor on a 1996 Mercury Villager?
Remove the glove box. The front blower motor and the resistor can be accessed from there.
If the blower stopped working my 2001 Kia Spectra could this be the motor blower resistor or should I replace the blower motor?
Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.
How do you check a blower motor resistor in 1999 mercury villager?
There is really no method to "check" the resistor, text by substitution.
How can you figure out which to replace the blower motor or blower motor resistor on a 1994 Nissan altima?
Check to see if you have 12 volts at the blower motor. If yes then the blower motor is bad. If no, then the resistor, relay, or fuse is bad.
Where is the blower motor resistor pack located on a 1999 Mercury Villager?
On the blower housing. Remove the glove box to gain access.
How do you replace blower resistor on a 2006 mustang?
# Locate the blower resistor under the right-side of the instrument panel # Disconnect the electrical connector from the blower motor resistor # Remove the blower motor resistor mounting screws and remove the resistor from the housing # Installation is the reverse of removal
1998 dodge stratus you replaced the blower motor resistor and your blower motor still works on high only?
replace the blower motor switch
2005 Hyundai santa fe replace blower motor and resistor still not working?
you need a new blower motor resistor with auto temp control
How do you replace blower motor resistor on 2003 Nissan altima?
One can replace blower motor resistor on 2003 Nissan altima by removing the old using spanners and replacing it with a new one.
How you change the blower motor resistor in Nissan maxima 2002?
To change the blower motor resistor in a 2002 Nissan Maxima, locate the blower motor resistor under the glove compartment on the passenger side of the vehicle. There is a clip that is depressed and then the resistor will slide out. Remove both ends of the resistor and then replace with the new resistor.
How do you test a resister in a blower?
To test the blower motor resistor, unplug the resistor connector. Each blower motor switch input terminal on the resistor must have continuity to the resistor output terminal, which is connected to the circuit going to the blower motor. If the blower motor resistor continuity does not check OK, replace the faulty resistor.You need a multimeter to test the resistor block and there should be continuity between all terminals.
