0
Disconnect the battery negative cable. !!!Power is still on when ignition switch off!!!
I have Olds Intrigue 2000. Blower control resistor (Controller) located behind the
blower motor. Very close to the firewall, and it is a pain in the neck to get there.
Using 5.5 mm. socket remove the blower first. (3 screws are holding the blower)
Using the same socket (5.5 mm) remove one visible screw which holds the resistor.
You will have to loosen two other screws located between the resistor and firewall. You don't need to remove them completely, just loosen them! Resistor just slides out
when they loose.
---------------------------------------------------------------------------------------------------------
Disconnect the battery negative cable.
Remove the RH instrument panel insulator retainers. Adjust the carpet for access.
Disconnect the courtesy lamp from the instrument panel insulator by turning 1/4 turn counterclockwise.
Remove the RH instrument panel insulator.
Disconnect the electrical connectors from the blower motor resistor.
Disconnect the blower motor resistor electrical connector from the blower motor.
Loosen, do not remove, both forward screws. The blower motor resistor opening is slotted as access is extremely limited.
Remove the rearward screw.
Remove the blower motor resistor.
What else can I help you with?
How do you replace a 2000 ford F250 blower resistor?
arnie frerichs
Where is the blower resistor on a 2000 Olds Intrigue?
It is under the dashboard against the firewall. You have to remove the blower motor first by folding yourself up into a ball, but it can be done.
2000 sentra blower only works on high?
You need to replace the blower motor resistor located near the glove box.
What makes the 2000 marquis ac blower stop working?
replace the blower motor resistor. it is located on the firewall near the heater hoses.
How do you replace the blower motor resistor on a 2000 Buick regal?
To replace the blower motor resistor on a 2000 Buick Regal, first disconnect the negative battery cable to ensure safety. Locate the resistor, which is typically found under the dashboard on the passenger side, near the blower motor. Remove the screws or bolts securing the resistor, disconnect the wiring harness, and then install the new resistor by reversing the process. Finally, reconnect the battery cable and test the blower motor to ensure proper operation.
How do you fix blower resistor on 2000 Chevy blazer s10?
Ain't no fixin it, you have to replace it with a new one.
Resistor for the heater blower in a 2000 Malibu?
resistor for fan blower is in back of glove box, beside the blower itself.
How do you fix a heaterAC blower motor that only works on the high setting on a 2000 Nissan Maxima?
If the blower motor in your 2000 Nissan Maxima only works on the high setting, the issue is likely a faulty blower motor resistor. To fix it, you should first disconnect the battery, then locate the blower motor resistor, usually found near the blower motor under the dashboard. Remove the resistor and inspect it for damage or burned connections; replace it if necessary. After installing the new resistor, reconnect the battery and test the blower motor to ensure it operates on all settings.
How do you replace a blower motor in a 2000 Oldsmobile intrigue?
To replace the blower motor in a 2000 Oldsmobile Intrigue, first disconnect the negative battery cable. Remove the passenger side under-dash panel to access the blower motor, which is located near the firewall. Disconnect the wiring harness and remove the blower motor by unscrewing the retaining screws. Install the new blower motor by reversing the process, ensuring all connections are secure before reattaching the under-dash panel and reconnecting the battery.
How do you replace a blower motor resistor on a 2000 Ford Focus LX?
Take it to someone who knows how, unless you're a certified Ford mechanic.
2000 Sunfire blower motor resistor?
heat not working
How do you change the blower motor resistor on a 2000 Pontiac grand am?
Please email me a photo of where the blower motor resistor is and how to change it. Thanks, Michael. By the way I want it for a 2000 Sunfire not a Grand Am.
