0
What else can I help you with?
Replace head gasket in s10 4-cylinder pickup?
Begin by removing the cylinder head from your Chevrolet S 10 four-cylinder engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder head to its original position.
How many liter engine does a 1994 Toyota pickup with a 4 cylinder engine have?
2.4 liters
What engine was in a 1968 Ford F-100 pickup?
8 cylinder 360
How do you adjust the slave cylinder on a 1989 Chevy pickup 1500?
There is NO adjustment, You must replace the clutch set to bring the pedal back to the right position. You also need to make sure the clutch slave cylinder/ master cylinder is good before replacing clutch assy.
Where is the timing chain location on 93 pickup 4x4 4-cylinder?
Outside the engine
Is there a rotor and distributor cap to replace on a 2003 6 cylinder silverado pickup?
yes ther is.
How do you replace fuel pump on 1993 Nissan 4-cylinder pickup?
its inside of your gas tank.
97 Nissan 4x4 pickup 4-cylinder 2.4 size engine where is the thermostat located to replace it?
follow your top radiator belt,its inside the thermostat cover.2 bolts hold it on.
How does a diesel engine pickup a tach signal?
From a crankshaft speed/position sensor.
How do you replace the master clutch cylinder on a 1993 Chevy pickup?
To replace the master clutch cylinder on a 1993 Chevy pickup, first, disconnect the negative battery cable and remove the clutch fluid reservoir cap. Then, detach the hydraulic lines connected to the master cylinder, taking care to catch any leaking fluid. Unbolt the master cylinder from its mounting position, and install the new cylinder by reversing the removal steps, ensuring all connections are secure. Finally, refill the clutch fluid reservoir and bleed the system to remove any air.
Where is the cam position sensor on a 97 Nissan pickup?
It is part of the distributor. You have to replace the distributor
What is the Bluebook value for 1986 S-10 pickup?
$1,870.00 to $3,592.00 with a 4-cylinder engine.
