0
To replace the cigarette lighter housing on a 2000 Chevy Metro, start by disconnecting the car battery to avoid any electrical issues. Remove the trim panel surrounding the lighter by gently prying it off with a flathead screwdriver. Once exposed, unscrew the lighter assembly from its housing, disconnect the wiring harness, and replace it with the new unit. Finally, reassemble the trim panel and reconnect the battery.
What else can I help you with?
How do you replace the cigarette lighter in a 1998 Chevy Prizm?
Remove the retaining ring at the top of your 1998 Chevy cigarette lighter. Slide the cigarette lighter out and remove the wiring harness. Reverse the process to install the new cigarette lighter.
How do you replace the cigarette lighter on a 2002 Chevy Impala?
The 2002 Chevy Impala cigarette lighter is held in place with a retaining ring. Remove the retaining ring and slide the cigarette lighter out. Remove the wiring harness from the back of the cigarette lighter. Reverse the process to install the new cigarette lighter
Replace cigarette lighter socket Chevy S10 pickup?
Gain access to the rear of the socket. Unplug the wires from the rear. Unscrew the housing and the socket will come out the front.
How do you change out Cigarette lighter in 1999 Chevy Malibu?
How do you replace a cigarette lighter in a 1999 Malibu
Cigarette lighter fuse in a Chevy pickup?
Where is the cigarette lighter fuse for a 2007 Chevy colorado
How to fix the cigarette lighter in a Chevy Beretta?
If the fuse is good, take the lighter out and check it in another car to see if it is good. If it is, then replace the recepticle. If it is bad, replace the lighter.
How do you replace cigarette lighter assembly in 2001 Chevy Prizm?
Remove the retaining ring on the top of the cigarette lighter assembly. Pull the cigarette lighter assembly out and remove the wiring harness from the back of the assembly. Reverse the process to install the new cigarette lighter assembly.
How do you fix a cigarette lighter on a Chevy Cavalier?
To fix the cigarette lighter on a Chevy Cavalier, check the fuse first. Next check the wiring and the cigarette lighter itself for a problem.
How do you remove cigarette lighter from a 2013 Chevy suburban?
To remove the cigarette lighter from a 2013 Chevy Suburban, first, ensure the vehicle is turned off and the key is removed from the ignition. Use a flathead screwdriver to carefully pry off the surrounding trim or bezel around the lighter. Once exposed, gently pull the lighter socket out of its housing, disconnecting any wiring harness attached to it. Replace it with a new lighter or reinstall the original by reversing the steps.
Chevy cavalier cigarette lighter doesn't work?
If a Chevy Cavalier cigarette lighter doesn't work, check the fuse. The fuse may be blown and will need replaced.
Where is the cigarette lighter fuse located in a 99 Chevy Malibu?
The 1999 Chevy Malibu cigarette lighter fuse can be found in the fuse box. The fuse box is located in the engine compartment. The cigarette lighter fuse will be in the second column, fourth from the top.
Where is the fuse for the cigarette lighter in a 1997 Chevy Malibu?
The 1997 Chevrolet Malibu cigarette lighter fuse is located in the fuse box. The cigarette lighter fuse will be in the second column, fourth from the bottom.
