answersLogoWhite

0

first you open the hood and in back of the headlight assembly you will find two large clips they look like long shoe horns you need to pull up on those clips and the whole assembly pulls out giving you access to the headlight bulb you then depress the tab on the back of the bulb and turn it until you can remove it ,be careful not to touch the new bulb with your fingers or get it dirty it may cause the bulb to blow out,just reinstall the new bulb the same way you removed the old one.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you replace the head lights on my 1999 Oldsmobile alero?

how do you replace head lights on my 1999 oldsmobile alero?


How much to replace 1999 alero water pump?

200.00


How do you replace the oil pump on a 1999 Oldsmobile alero with a 3.4 liter V6?

how do you replace the oil pump


How do you replace a 1999 Pontiac Grand Am SE headlight?

There are bolts surrounding the headlamp. remove these and the wires.


How do you replace a headlamp on a 1999 Honda Accord LXI?

There was not a 1999 Honda Accord LXi made. Do you have a 1989 Honda Accord LXi?


Where is the alternator located on a 1999 Oldsmobile Alero 4 cylinder?

On a 1999 Oldsmobile Alero with a 4-cylinder engine, the alternator is located on the front side of the engine, near the top, slightly towards the driver's side. It is mounted on the engine block and can be accessed from the top of the engine compartment. You may need to remove the serpentine belt to replace or service the alternator.


How do you replace the headlight bulb located on a 1999 Pontiac Grand Am SE?

There are bolts surrounding the headlamp. remove these and the wires.


What is the Proper tire inflation for a 1999 olds alero?

look at the data/spec decal on the inside of the driver's door post.


How do you replace a Volvo 1999 V70 headlamp?

To replace the headlamp on a 1999 Volvo V70, first, open the hood and locate the back of the headlamp assembly. Disconnect the electrical connector and remove the rubber cover. Unscrew the retaining ring or clip that holds the bulb in place, then carefully pull out the old bulb. Insert the new bulb without touching the glass, secure it with the retaining ring, reconnect the electrical connector, and replace the rubber cover. Finally, test the headlamp to ensure it’s functioning correctly.


How do you replace the headlamps for a 1999 Jeep Grand Cherokee larado?

Take out the 6mm bolt and pull outwards on the headlamp assembly.


How do you replace the headlight headlamp bulb on a 1996 1999 Mercury Sable Ford Taurus?

Ask at an auto parts store.


How do you test ignition coil on your Alero 1999?

1999 Alero how do i test ignition coil pack