How do you replace the driver side mirror on a 2003 Toyota Camry?

Answer 1

Side MirrorsElectric, cable operated, or manual? In any case remove the driver side door panel, on the inside of the car in the fender side corner where the mirror mounts, you will either have a small Phillips screw holding the mirror backin on, or it may have plastic tabs, and can be gently popped off using a flat blade screwdriver. Once the door panel, and inside mirror mount cover are removed, you should see three 10mm nuts, arranged in a triangular pattern behind the inside mirror cover. If the mirror is electric, after removing the three 10mm nuts and slowing pulling the mirror off on the outside, you will see the wiring connector for the mirror, unsnap the tab and remove the mirror. On a note occasionally it may be easier to undo the mirror if the window glass is all the way down. If the mirror is manual, just remove the three 10mm nuts and remove the mirror. If it is a cable operated mirror, with the "joystick" to adjust it on the inside, once the three 10mm nuts are removed, on the inside portion of the inside back of the mirror, the "joystick" is held to the back cover by a small metric Allen screw, with the right sized Allen loosen this screw, but not all the way out. After it's loosened sufficiently the "joystick" assembly should slide right out of the cavity it's in. Be careful when removing mirrors, often times there is a rubber grommet that any wiring or "joystick" slips through.