To replace the driver's door hinge pins on a 2003 Chevy Express van, first, support the door to prevent it from falling. Remove the hinge cover and then use a hammer and punch to drive out the old hinge pins. Once the pins are removed, insert the new hinge pins and secure them in place. Finally, test the door's movement and reattach any removed components.
I need passenger door hinges for my chevy aveo 2007
To replace the rear door hinge pins on a 2001 Chevy Express cargo van, start by supporting the door with a jack or a sturdy object to prevent it from falling. Remove the hinge cover if present, then use a hammer and punch to drive out the old hinge pins from the top and bottom hinges. Insert the new hinge pins, ensuring they are seated properly, and reattach any covers. Finally, test the door movement to ensure it opens and closes smoothly.
Replace the hinge pins and bushings.
To replace the fuel door hinge on a 2005 Chevy Malibu, first, open the fuel door and locate the hinge. Remove the old hinge by unscrewing any screws or bolts that secure it to the body. Align the new hinge in place, then secure it with the screws or bolts. Finally, test the fuel door to ensure it opens and closes properly.
I had one person heat the hinge with a welding torch until it was cherry red, and then I used an air chisel to inch it out. We did this back and forth getting about an 1/8 of an inch each time. Replace with a new hinge and use the pins with a grease fitting.
Not removable- replace entire hinge assembly
You replace The hinge pins
To replace the Ford Explorer rear window hinge, you have to buy a similar window hinge. Use a screwdriver to open the hinge and replace the hinge but fitting it in the window.
I would recommend you replace the entire hinge and forget about repairing it. In my experience this is the best route to take.
i used to work for a Chevy dealer....if you already put new hinge pins and bushings in you now have to replace hinges that have to be welded in
Very difficult job. All of the hinges are welded in that's one problem. To correctly replace the drivers side upper half, the dash assembly needs to be removed to gain access to the back side of the "A" pillar. I would suggest purchasing a shop manual if you intend on doing that job yourself.
The price to replace these items can be anywhere from 20 dollars to 450 dollars. It depends on where you go to have it done and what they charge.