If you have non-power windows, you must remove the window crank first (the part that attaches to the door pops up and a torx screw is there). # Remove the screws on the bottom of the door panel. # Remove the screw from the grab handle (where you put your hand to close the door). # Lift the whole door panel up and it will come loose (if you have power windows/mirrors they have to be unplugged before completely removing the door panel). # Remove the stick on white plastic triangle from the inside of the door. # Remove the three 11 mm nuts from the mirror studs.
how do i replace front wheel bearinbs on 2000 ford ranger 4wd
How do you replace the bulb in the mirror of a 2000 E320 Mercedes
If you have to ask, pay a professional to do it. You risk you, your passengers, and other drivers safety otherwise.
My 2002 has it in the drivers side mirror.
How to replace passenger side view mirror on 2000 GMC Yukon?
how to remove a passenger side mirror on a 2000 toyota 4 runner
passenger side button is broken.....
On a 2000 Ford Ranger : Open the drivers door , and on the latch pillar will be an information sticker that shows the original size of tires on the vehicle from the factory
you might have to take the door panel off or loose to access the 3 mirror bolts that hold it on but it's a simple operation, and if it's electric you just have to remove the 3 bolts and unplug the wires.
You probally wont have to replace the whole mirror assembly but just the glass mirror part itself
Bank 2 is the drivers side of the engine
To change the driver's mirror on a 2000 Chevrolet S10, start by removing the interior door panel. This typically involves unscrewing several screws and prying off clips carefully. Once the panel is off, disconnect the electrical connector for power mirrors if applicable, then unscrew the mirror from the outside of the door. Finally, replace it with the new mirror, reattach the door panel, and reconnect any electrical components.