Cut it out and weld a new one in.
the converter is blocked inside. you have to replace it.
The converter assembly is a bolt on part, or you can cut out and weld in generic units to replace the existing ones.
Unless you have a California model, the converter assembly sells in the aftermarket for about $300.
You either bolt on a new assembly, or cut the old ones out and weld generic units in place.
You don't, you replace or rebuild the engine.
how to replace headlight and bulbs 98-02 mercury villager
I would like to answer that but I don't know what a "moniford" is.
You don't as it does not have a cable. You replace the speed sensor instead.
To replace lamps the cluster must be removed.
The brakes on the Villager are as straight forward as the brakes on a 1965 Mercury. Only normal brake tools are required.
The engine in the Mercury Villager does not use a timing chain, it uses a timing belt. The recommended belt replacement interval is 105,000 miles.
The fuel pump is in the tank and the tank must be removed to replace it.