Do you mean the front wheel bearings??, if so.. you need to take the wheel off take the rotor, caliper/hanger and caliper all off.. crack the bottom ball joint pry the strut around.. there are 4 bolts u need to take out. they are holding the wheel bearing in place.. and then the bearing should come out.. it wont fall out you may have to pry on it to get it out it might be a little rusted in there Hope that helped...
bearings
blown brake hose, front passenger side in 1997 chevy malibu?
Replace them.
No.
Did you ever get anywhere on this thread? I'm looking to replace the front bearings and rotors on my 2000 ZR2.
Ask Watt
Front or rear bearings? 2 or 4 wheel drive? year of truck?
Depending an where you live and which shop you have do the work about $300.00
you can't replace just the front wheel bearings, they are sealed so you have to replace the entire hub assemble and it will cost approximately $130 each side.
2005 Chevy Malibu, shocks in rear, Struts in front.
There are many dissimilar vehicles vehicles out there called Chevrolet Malibu, and front/rear wheel bearings can be different. Is your Malibu FWD or RWD? If fwd: no. The wheel bearings are ball-in-cage type bearings that are an integral part of the hub-and-bearing assembly which must be replaced as a unit. If rwd: maybe. The front wheel bearings are taper bearings held in place by a nut with cotter pin. The rear rear wheel bearings (axle bearings) are in fact pressed into the axle tube.
My 1999 Chevy Malibu has a fuse box under the front hood,