I am no professional. It takes some doing. In my case, I had to pop out the plastic pop rivets holding on the black plastic cover underneath car. Then(here's where the pain starts)hold cover back and push arm in until you can feel the back of the coupler for the light you wish to replace. Squeeze tabs, twist 1/4 turn, and remove. The harness should come down far enough to be visible and allow bulb change. Install new bulb, reinsert into socket, and pop plastic rivets back in plastic shield.
need to replace my front lower running / blinker bulb how do i do it
Replace bulb and check socket for ground and Hot
How do you change a front blinker bulb for a BMW X5 2001?
it sounds like you have a broken bulb in your right blinker. you can replace it yourself by looking up the make and model at a parts store to get the right type of bulb and then replace it by going from behind the bumper or finding a way to remove the light from the front
I get everything out of a junk yard
There is a long bolt on top of the headlight/blinker assembly. Remove this bolt and slide the entire headlight/blinker assembly out just enough that you can see the bulb socket. Twist the socket and it will pop right out.
Replace the bulb.
To change the front blinker bulb on your 1986 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.
To change the right front blinker bulb in a 2005 Chevy Cobalt, first, open the hood and locate the headlight assembly. Remove the plastic cover or the headlight assembly itself by unscrewing the retaining screws. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Reassemble everything by reversing the steps and ensure the new bulb is securely installed.
Probably just a burned out bulb in the front one. Those bulbs have 2 elements so the marker light will still work but the blinker wont.
To change the front blinker bulb on your 1989 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.
trouble putting right front signal bulb in.