The answer can be found at www.dippy.org. I just did this last week
You have to pull the entire dashboard. I have done it and it gets easier every time. Get the Haynes/Chilton manual and it will tell you how. Get the proper speakers and it is a afternoon job.
Which speakers are you trying to replace? Front or rear?
To replace the front door speakers on a 2008 Chrysler Sebring, start by removing the door panel. This typically involves unscrewing any visible screws, prying off plastic clips, and carefully lifting the panel away from the door. Once the panel is off, disconnect the speaker wiring harness and remove the old speakers. Install the new speakers by connecting the wiring, securing them in place, and reassembling the door panel in reverse order.
To replace the front speakers in a 1999 Chrysler Voyager, first, remove the door panel by unscrewing any visible screws and gently prying it away from the door frame. Disconnect the speaker wiring harness and remove the old speakers by unscrewing them from their mounts. Install the new speakers by securing them in place and reconnecting the wiring harness, then reattach the door panel, ensuring all clips and screws are properly secured.
To replace the speakers in a Town and Country you will need to remove the old ones first. Consult your owners manual for how to take out your speakers.
6x9 & 5x8 6
take out the old speakers and put in the new ones.
To replace the front speakers in a Toyota Sienna the door panels must first be removed. With the door panels removed the speakers will be easily accessible and the mounting screws can be loosen. Unplug the speakers and remove them. Install the new speakers.
Front speakers are in the door. remove screws on the door panel, then remove the panel and you'll see the speaker
Gently pry off plastic covers in door They are held in by clips underneath are speakers held in by 2 or 3 screws remove speakers. Wires should be snap in plugs remove by unsnapping plug-in.Connect snap-in plug wires to new speakers Place new speakers in door slot for speakers,screw back in ,remount cover back in place
To replace the front brake pads on a Chrysler Fifth Avenue, you will need a few essential tools: a lug wrench to remove the wheel, a C-clamp or brake caliper tool to compress the caliper piston, a socket set or wrench for the caliper bolts, and possibly a torque wrench to ensure proper reassembly. Additionally, having brake cleaner and a brake pad lubricant can help with installation and maintenance. Safety equipment, such as gloves and goggles, is also recommended.
The size of the front speaker are 5'x4'. You can get adaptor plates to fit 5" speakers. Premium audio also has tweeters. They are pop riveted to the a pillar which is more difficult to replace.